Axis
  Sitemap |
 
Roof windows
Blinds
INSTALLATION SEQUENCES JUST FOLLOW THESE STEPS print page

.Roof windows
Fixing the slate flashing

Fixing the slate flashing

Replacing the slates

Replace the slates beneath the window. Replace the slates as you go up the frame with each side flashing section.

top

Affix the bottom flashing

Fix bottom section of flashing to frame.

top

Fix bottom cover

Fit and fix the bottom cover part.

top

Replace slates

Replace the slates as you go up the frame with each side flashing section.

top

Fix the side flashing

Fit side flashing sections, ensuring they sit level with the slates.
Trim the top side flashing.
You will most likely have to cut the top side flashing so that it finishes flush with the top of the frame.
Repeat on other side
Repeat these procedures for the other side of the frame.

top

Fix side covers

Fit and fix side cover parts.

top

top

top

Fix top covers

Fit and fix top cover parts.

top

Install top flashing

Fix top flashing section.
Check fitting

top



It should sit tightly over the top window cover part.

top

Replace roof material

Replace roofing material above the window maintaining the recommended tolerances (60-100mm).

top

Replace sash

Replace sash in frame. Make sure you support the frame firmly before locating the hinge arms into the locking mechanism.

top

Job done

That's it! You have now installed your roof window.

top

 
 
PRODUCTS | PRACTICAL ADVICE | INSTALLATION | SECURE AREA | SUPPORT | DOWNLOADS
TECHNICAL SPECIFICATION | MAINTENANCE | SITEMAP
  © 2018 AXIS90. All rights reserved / Terms & conditions / Privacy policy / General Terms of Sale and Delivery W3C