Axis
  Sitemap |
 
Roof windows
Blinds
INSTALLATION SEQUENCES JUST FOLLOW THESE STEPS print page

.Roof windows
Fixing the frame

Fixing the frame parts

Fasten a batten

After determining the correct height of the window installation fasten a batten to support the window frame.

top

Separate sash from frame

To install the frame, it must first be separated from the sash. Open the sash an rotate it through 180 degrees.

top

Unlocking the hinge

Locate and press the locking mechanism on each hinge (it should make a click) and separate the sash from the frame.

Once the hinges are released, carefully separate the sash and place to one side (store horizontally).

top

Placing brackets

top

Installing the frame

Carefully pass the frame (with brackets fixed) through the opening. Place frame on support batten and lay flat on rafters.

top

Check frame alignment

If level, fix the bottom brackets.

top

Final alignment check

Replace the sash to test that it opens and closes properly. If is not closing properly it is best to find out at this stage.

top


To make sure the frame is set properly check the gaps at the closure of the sash. If the vertical gaps are parallel as well as the gap at the bottom in slightly opened position, then the frame is correctly aligned , and the top brackets can be fixed.

top

top


A plastic wedge is supplied to pack the bracket where there is an uneven rafter.

top

Install the brackets

top

 
 
PRODUCTS | PRACTICAL ADVICE | INSTALLATION | SECURE AREA | SUPPORT | DOWNLOADS
TECHNICAL SPECIFICATION | MAINTENANCE | SITEMAP
  © 2018 AXIS90. All rights reserved / Terms & conditions / Privacy policy / General Terms of Sale and Delivery W3C